A sanded acrylic formula that adheres to brick, block, stone and concrete surfaces and blends with the texture and color of surrounding mortar. Use for tuck-pointing and sealing mortar joints.

HENRY? ReadySet? pre-mixed mastic adhesive is a premium, installer-grade adhesive for installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors and countertops. HENRY? 314 can be used to install tile up to 12 in x 12 in and has excellent grab.

HENRY? 430 ClearPro? is a premium, clear thin-spread adhesive designed to install vinyl composition tile (VCT) in residential and commercial installations.

PlasticWeld? is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld? will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld? sets in 5 mins at room temperature and is fully cured in 1 hr. Using a 1:1 mixing ratio, PlasticWeld? combines to a tensile strength of 3200 psi and cures to an off-white color.

J-B MarineWeld? is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld? sets in 4 to 6 hrs at room temperature and is fully cured to a dark gray color in 15 to 24 hrs. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the water surface.

DAP CONTACT CEMENT 1PT 16 OZS

A premium multi-purpose adhesive for installing commercial and residential felt-backed and cork sheet flooring, linoleum and commercial carpet.

RED HEAD A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry. A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions.

SteelStik? is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to buildup, patch and repair steel components. SteelStik? sets in 3 to 5 mins and after 60 mins, can be drilled, tapped, machined, ground, filed and painted. SteelStik? cures to a dark gray color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.

3M yellow super weatherstrip and gasket adhesive securely bonds rubber gaskets and weather-stripping to metal surfaces. This flexible, high-strength adhesive helps ensure a tight waterproof seal on car doors, trunks, sun roofs and more. It cures fast and works right out of the tube, holding rubber weather-stripping in place and resisting heat, vibration, oils and detergents.

HENRY? 430 ClearPro? is a premium, clear thin-spread adhesive designed to install vinyl composition tile (VCT) in residential and commercial installations.

DAP CONTACT CEMENT 2OZ TUBE/BOTT

WaterWeld? will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld? has a set time of 15 to 25 mins and sets hard in 1 hr. WaterWeld? cures to an off-white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.

J-B KwikWeld? is a fast setting version of the original J-B WELD? two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld? has a 1:1 mixing ratio, sets in 6 mins and is fully cured in 4 to 6 hrs. J-B KwikWeld? cures to a dark gray color, is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 deg F.

Loctite PL Premium construction adhesive is a one component, polyurethane based, moisture-curing adhesive. It is VOC compliant and contains no chlorinated solvents or water. Loctite PL Premium provides superior adhesion to most common construction materials. Since the bonding strength of PL Premium is so strong, it offers twice the coverage of conventional adhesives therefore much less adhesive is required to complete projects. PL Premium can be used for interior or exterior projects and is 3 times stronger than ordinary solvent based construction adhesives during initial 24 hr cure. It is also waterproof, paintable and cures even in cold temperatures. Ideal for sub floor installations.